In GLASGLOBAL you have the possibility to calculate glazing with up to 16 point holders.
We would like to draw your attention to our new module for GLASGLOBAL® for the recently published Part 6 of DIN 18008.
The software products "WinSLT®" and "GLASGLOBAL®" of Sommer Informatik GmbH from Rosenheim were extended by a database for tested superstructures and their sound insulation dimensions.
In our presentation video we introduce the new module to you.
Consideres the diaphragm tensioning effect according to DIN EN 13474-2: 2000
See at a glance what dimensions would be appropriate for your glazing, and how much is their degree of utilization.
The add-on "Product-specific shear module" is available in the expert software GLASGLOBAL® for the static verification of glazing according to DIN 18008. In GLASGLOBAL® the shear modulus for composite layers (e.g. Trosifol SentryGlas®) can be considered depending on the type of load.
...continue reading "Product-specific shear module"
The additional requirements for walk-on glazing are regulated in part 5 of DIN 18008. These glazing must consist of laminated glass with at least three panes. Both symmetrical and asymmetrical composite safety glasses can be calculated.
Line-shaped glazed units, which were defined in the TRLV until December 2010, have been found since then in DIN 18008 part 2. For example, the calculation is no longer based on a global safety factor but on partial safety factors. These take into account the uncertainties in the system, the loads and the materials.
From 26 - 29.11.2018 the Big5 Dubai takes place and Sommer Informatik is represented with a booth. We invite you to visit us there.
Bex Asia Singapore will take place from 5 - 7 September 2018 and Sommer Informatik will be represented with a stand. We invite you to visit us there.