Software for calculating heat flows, thermal bridges, isotherms and Uf-values according to EN ISO 10077-2:2017

Software for calculating heat flows, thermal bridges, isotherms and Uf-values according to EN ISO 10077-2:2017

Software for calculating heat flows, thermal bridges, isotherms and Uf-values according to EN ISO 10077-2:2017

Slider
Slider



WINISO®

Calculating heat flows, thermal bridges, isotherms and Uf-values according to EN ISO 10077-2:2017.
sowie Ufr-, Ueg- und Ucg-Werte nach ISO 15099 und NFRC.

Imported CAD files can be analysed automatically and failures in the drawing are removed by the sofware. Therefore complex constructions and systems can be calculated within a short time. Due to the integrated FEM calculating engine, results are determined very precisely.

Features

  • Highly automated geometry processing of CAD files in .dxf and .dwg format
  • Detailed geometrics and efficient computation of inclinations and radii
  • Automated material assignment based on CAD layers
    New solver and calculating enginge with automated FEM-mesh generation
  • Calculation according to „Radiosity-Model“ (new cavity model according to EN ISO 10077-2:2017) and equivalent thermal conductivity (EN ISO 10077-2:2012/2017)
  • Simple definition of foils, coatings and surface characteristics by polylines
  • Various mixable gas filling of the cavity according to EN 673
  • Automatically determined Uf-values of windows and facade profiles
  • Automated Psi-values of thermal bridges and insulating glass spacer according to EN ISO 10211 and EN ISO 10077-2
  • Ug-values of insulating glass units according to EN 673
  • U-value computation of any construction
  • Calculation of isotherms, surface temperatures and temperature factor

Features

  • ISO 15099

    Our expert software WINISO® has been extended by the calculation according to the American standard ISO 15099.

  • Humidity

    The following evaluation modes are available with the “Humidity” add-on

  • isotherms

    Isotherms are curves of the same temperature that show the quality of a component with regard to the loss of condensation and the risk of mould

  • Uf-Value

    The U value of a frame, called Uf value, indicates the heat transfer through the area of the frame and is based on DIN EN ISO 10077-2.

  • Psi-value

    The length-related heat transfer coefficient, called Ψ value, indicates the heat transfer through the edge seal for windows and is based on DIN EN ISO 10077-2.


Events

  • 20.03.2019 User Seminar WINISO® *fully booked*

    On 20.03.2019 a seminar on the software solution WINISO® will take place. Also for this year we have planned WINISO® seminars. We will start on 20.03.2019 in Rosenheim. Get to know all important contents of the standard EN ISO 10077-2:2018 as well as the handling and innovations of our software WINISO®! Date: 20.03.2019, 10.00 –

  • 05. – 08.06.2019 – AIA Las Vegas

    05. – 08.06.2019 – AIA Las Vegas