Basic module according to DIN 18008 – 1 + 2

The regulations on glass dimensioning in Germany have steadily developed and changed in recent years. What is still valid is that a static proof for glass constructions is necessary. The previously valid regulations TRLV, TRAV and TRPV have been superseded by the DIN 18008 Glass in Construction – Design and Construction Rules.

Line-shaped glazed units, which were defined in the TRLV until December 2010, have been found since then in DIN 18008 part 2. For example, the calculation is no longer based on a global safety factor but on partial safety factors. These take into account the uncertainties in the system, the loads and the materials.

The structure of your glazing can be created with just a few clicks. Project data such as storage or geometry can be easily selected from a list without the hassle of having to determine coordinates for the design or assign a storage location to each side. An auxiliary sketch immediately shows the structure of the disk and thus supports the editor in entering the correct project data.