GLASGLOBAL® 18008
The professional statics software according to DIN 18008 contains all the necessary calculations and loads. With GLASGLOBAL®, glasses according to DIN 18008 can be dimensioned statically. All loads to be considered such as snow, wind, dead weight, traffic loads or climatic fluctuations in air pressure and temperature are tested during the calculation.
Stress and deflection are compared with the permitted values and displayed on a clear result expression.
Features:
- Static verification of glazing according to DIN 18008: 2012 Part 1 to 6
- Large number of pre-installed products such as glasses, point and clamp holders
- Calculation according to finite element method of any shape and storage of the glazing
- Maximum values of the deflection and tension of the individual washers for relevant and freely defined load combinations
- Verification of all load cases (snow, wind, dead weight, traffic loads)
- Wind and snow loads for Germany according to EN 1991-1-3 and -4 with optionally available wind and snow load module for Switzerland
More features:

- Basic module according to DIN 18008 – 1 + 2
The regulations on glass dimensioning in Germany have steadily developed and changed in recent years. …
- Point – mounted glazing according to DIN 18008 – 3
The technical rules for the design and implementation of point-mounted glazing (TRPV) for vertical and …
- Crashproof glazing according to DIN 18008 – 4
Glass elements prevent the falling of people from a higher height, according to DIN 18008 …
- Walk – on glazing according to DIN 18008 – 5
The additional requirements for walk-on glazing are regulated in part 5 of DIN 18008. These …
- Accessible and fall-through-proof glazing according DIN 18008-6
According to DIN 18008-6 the addon “Accessible” was implemented in GLASGLOBAL®. DIN 18008-6 distinguishes between the …
- Additional modules
Membrane tension Consideres the diaphragm tensioning effect according to DIN EN 13474-2: 2000 Size …
News GLASGLOBAL®: